Cab Guards

Wood's Logging & Inustrial Supply Truck Accessories

Tractor-Trailer Cab Guards and Droms

Pro-Tech aluminum cab racks are designed to provide strength, and top quality appearance. Each cab rack design has been tested by an independent laboratory according to the Bureau of Motor Carrier Safety Regulations 393.106. Cab racks are available for standard truck cab sizes, with unlimited options available. Racks and droms MUST be installed with Pro-Tech mounting kit and per instructions provided. Failure to do so will void warranty and seriously reduce load rating of cab rack.

Warning: For your safety, always comply with all cargo securement requirements of Title 49CFR s.393 et seq.

Pro-Saver Cab Rack

Sleek Heptagon perimeter tube enhances the original. Pro-Tech shape and time proven bright aluminum diamond plate panel.
Specifications:
10-1003: 65″ high x 70″ wide
10-1093: 68″ high x 86″ wide
10-1033: 68″ high x 70″ wide
10-1103: 68″ high x 90″ wide
10-1083: 68″ high x 80″ wide


Truck-Accessories-Pro-Saver-Cab-Rack

Pro-Tech Traditional Style Cab Rack

Pro-Tech Original triangular shape perimeter tube with diamond plate panel.
Specifications:
10-1000: 65″ high x 70″ wide
10-1090: 68″ high x 86″ wide
10-1030: 68″ high x 70″ wide
10-1100: 68″ high x 90″ wide
10-1080: 68″ high x 80″ wide


Truck-Accessories-Pro-Tech-Traditional-Style-Cab-Rack

Cab Rack with 10-5000 window

Window may be ordered with any Pro-Tech Cab Rack or Drom.
Specifications:
10-1003 10-5000


Truck-Accessories-Cab-Rack-with-10-5000-window

10-1003 Cab Rack with 10-5000

Two each 10-5902 locking chain hangers, chain trays and 10-2401 tool box. Other options may be added to fit your needs.


Truck-Accessories-10-1003-Cab-Rack-with-10-5000

Enclosed Cab Rack

14″ deep compartments provide 37 cubic feet of storage space. Stainless steel, keyed T-latches ensure security. Compartments are sealed with neoprene bulb type weather seal to keep equipment clean and dry. Enclosed units available with any Pro-Tech Cab Rack or Drom.


10-1150: Enclosed 68″ high x 86″ wide.


Truck-Accessories-Enclosed-Cab-Rack

Conventional Drom Configuration With 10-5–5 window option

The cab rack panel is 68″ high. The panel and deck are 70″ wide and they match the width of conventional cabs without sleepers. It gives a streamlines appearance and reduces wind resistance.

NOTE: Drom length is measured from forward (cab side) of cab rack uprights, to extreme rear (fifth wheel side) of deck.


10-1150: Enclosed 68″ high x 86″ wide.


Truck-Accessories-Conventional-Drom-Configuration